Custom Cuvette and Flow Cell Manufacturing

Posted by admin 12/01/2015 2 Comment(s) About Aireka Cells,

 

Limitless Design Capabilites

 

Utilizing our acquired knowledge of quartz and glass manufacturing, we are able to make virtually anything out of these materials.  Below is a short list of our capabilities, if the custom cuvette is not listed below please contact us.

 

  • Flow Cytometry Cells
  • Micro Flow Channel Cuvettes
  • Modifications on Standard Stock Cuvettes
  • Liquid Chromatography (LC) Cuvettes
  • Quartz Plates and Discs
  • Cuvettes for Particle Counting


How Do I Request a Quotation?

 

It's easy for us to prepare a quotation for the part you need. All we need to get started is a rough sketch with dimensions and tolerances.  What we will do is take your sketch, make any enhancements if necessary, ask any questions that need to be addressed, and in a day or two you will be presented with your custom quotation.  

 

The Aireka Cells Custom Manufacturing Guarantee

 

Every cuvette and flow cell that we manufacture carries the same Aireka Cells guarantee.  What this means for you, our loyal customers, is peace of mind that the parts you receive will have been thoroughly inspected by our ISO certified inspection team in our Class 5 clean room.  Our inspection process will check your part(s) for optical, physical, and if needed, functional defects. The flow cells or cuvettes you receive will be made to the exact dimensions and tolerances that you specified, no exceptions.

 

We do not stop working once we ship the parts to you. If a cuvette or flow cell leak or have some other problem, we will investigate the matter in depth until it is resolved.  Aireka Cells follows up to make sure that the cells are functioning as intended.  If the cuvettes or flow cells are not working as intended, we will help troubleshoot problems right along side you.

 

Benefits for Using Aireka Cells for Your Custom Design Needs

 

  • Best Pricing on Small and Large Quantities
  • Fastest Shipping For Custom Designs
  • Fast and Easy Quotation Process
  • Knowledgeable and Friendly Customer Service and Support
  • Custom Engraving/Labeling Available

 

 

2 Comment(s)

Kurt Thorn:
26/01/2016, 12:14:44 PM
Reply

Hi, I'm looking for a custom cuvette, 10 mm tall x 20 x 20 mm on a side, with all four sides polished. Is this something you could provide?Thanks, Kurt

Luca lova:
18/10/2016, 07:28:26 PM
Reply

Hi I 'm building a flow cytometer I'm searching for a flow cell cylindrical with a diameter between 3 and 4 cm -30 40 mm. Could you help me?

Write a Comment

Submit